- Check pack design (fig. 1) and pack height is 19 mm (fig. 2)
- Check the ARI Barcode on all ARI packs (fig. 3)
- Check if it's present the ARISIL Grease included (fig. 4)
- Check if the inner lip is fine ground matt, no flash (fig. 5)
- Check if the spring is made of steel (fig. 6)
- Check Ariete name on every seal (fig. 7)
-
Here are the 7 steps to identify an original ARI the original fork oil seals by Ariete:
-
Ariete Heritage Grip 00699-CFR is part of a program made up of our Ariete Old Models, which with their old fashion look are pefect as accessories for all the Café Racer and "Special" motorbikes.
- CLOSED ENDS
- Made at their time between the 60’s and the 80’s
- Available in the trendy colors of the Café Racer motorcycles world
-
Ariete Heritage Grip 00699-CFM is part of a program made up of our Ariete Old Models, which with their old fashion look are pefect as accessories for all the Café Racer and “Special” motorbikes.
- CLOSED ENDS
- Made at their time between the 60’s and the 80’s
- Available in the trendy colors of the Café Racer motorcycles world
-
Ariete Heritage Grip 01604-CFR is part of a program made up of our Ariete Old Models, which with their old fashion look are pefect as accessories for all the Café Racer and "Special" motorbikes.
- CLOSED ENDS
- Made at their time between the 60’s and the 80’s
- Available in the trendy colors of the Café Racer motorcycles world
-
Ariete Heritage Grip 01628-CFR is part of a program made up of our Ariete Old Models, which with their old fashion look are pefect as accessories for all the Café Racer and "Special" motorbikes.
- CLOSED ENDS
- Made at their time between the 60’s and the 80’s
- Available in the trendy colors of the Café Racer motorcycles world
-
Ariete Heritage Grip 01628-CFN is part of a program made up of our Ariete Old Models, which with their old fashion look are pefect as accessories for all the Café Racer and "Special" motorbikes.
- CLOSED ENDS
- Made at their time between the 60’s and the 80’s
- Available in the trendy colors of the Café Racer motorcycles world
-
Ariete Heritage Grip 01628-CFM is part of a program made up of our Ariete Old Models, which with their old fashion look are pefect as accessories for all the Café Racer and "Special" motorbikes.
- CLOSED ENDS
- Made at their time between the 60’s and the 80’s
- Available in the trendy colors of the Café Racer motorcycles world
-
-
Ariete Classic MX 01671, with its chunky profile and familiar appearance, has become the classic Ariete Off-road grip. Years of use have confirmed the value of this well-tried designs. Keenly priced motocross grip for muddy conditions.
- CLOSED ENDS
- Material: hypo-allergenic
-
Ariete Estoril 02615-SBK is the Classic Ariete grip for Superbike and Road Racing. Years of use have confirmed the value of this well-tried designs.
- AMAZING GRIP
- Rigid sub-strate with soft outer skin
- Cleverly-designed to give exceptional grip and absorb vibration
- 3 built-in wire-on grooves
- Technical micro-pyramid pattern
- Minimal flanges
- Special anti-allergy material
- Pierced for bar-end balance weights
-
Ariete 02616 is the Classic Ariete FOAM grip for Rally and Desert races. Years of use have confirmed the value of this well-tried designs.
- Hypo-allergenic material
- Pierced ends
- 2 plastic bungs to exclude sand or dust from throttle and bar ends
- Anatomical shape
-
Ariete Unity Slimline 02619/H is part of Ariete Off-Road technical grips, whose form was sculpted in real time by the hands and experience of top riders. MORE INFO UNITY GRIPS TECHNOLOGY
- AMAZING GRIP
- Moulded in a single-compound format
- With an all-over grippy diamond surface
- Pronounced inner flange
- Anatomically-profiled channel at the inner end for thumb and forefinger
- Outer cap pre-marked for piercing, with a cutting guide for use with all-round hand guards
- Four wire-on grooves for extra security
- The fourth groove is at the extreme outer end of the grip, and prevents grit from being trapped between bar and grip or bar and twist grip when used with hand guards.
-
Ariete Unity Slimline 02619-N is part of Ariete Off-Road technical grips, whose form was sculpted in real time by the hands and experience of top riders. MORE INFO UNITY GRIPS TECHNOLOGY
- AMAZING GRIP
- Moulded in a single-compound format
- With an all-over grippy diamond surface
- Pronounced inner flange
- Anatomically-profiled channel at the inner end for thumb and forefinger
- Outer cap pre-marked for piercing, with a cutting guide for use with all-round hand guards
- Four wire-on grooves for extra security
- The fourth groove is at the extreme outer end of the grip, and prevents grit from being trapped between bar and grip or bar and twist grip when used with hand guards.
-
Ariete Unity Slimline 02619 is part of Ariete Off-Road technical grips, whose form was sculpted in real time by the hands and experience of top riders. MORE INFO UNITY GRIPS TECHNOLOGY
- AMAZING GRIP
- Moulded in a single-compound format
- With an all-over grippy diamond surface
- Pronounced inner flange
- Anatomically-profiled channel at the inner end for thumb and forefinger
- Outer cap pre-marked for piercing, with a cutting guide for use with all-round hand guards
- Four wire-on grooves for extra security
- The fourth groove is at the extreme outer end of the grip, and prevents grit from being trapped between bar and grip or bar and twist grip when used with hand guards.
-
Ariete 02620 is the Classic Ariete QUAD/ATV grip. Years of use have confirmed the value of this well-tried designs.
- Anatomically profiled cut-out for thumb and forefinger
- Outer flange pre-marked for piercing with a cutting guide for use with all-round hand guards
- Palm in legendary Supersoft®, critical finger-grip area with half-waffle surface
- Micro-pyramid pattern provides firm safe grip
- Minimal inner flange
- Two moulded safety wire-on grooves with space to tighten the wire
- Slimline profile
