Super-fast Grip Glue Ariete 12992 is useful for an excellent grip.

  • Dries in 30 to 90 seconds
  • High viscosity
  • Packaging of 20 gr
  • Read and follow description instructions carefully




  1. clean and dry handlebar, throttle pipe and inside grips.
  2. if throttle pipe is damaged, replace it. Cover any openings to avoid gluing pipe to handlebar.
  3. apply beads of ARIETE SUPER-FAST GLUE to outside of throttle pipe, left end of handlebar and inner end of grips.
  4. align the grip in the correct position and quickly slide it on.
  5. clean off all excess glue at inner face of grip flange.
  6. before operating the vehicle, check that the throttle twist-grip moves freely. Fully open the throttle by turning the grip towards you, and then release it. The twist-grip should turn freely, and return to its normal closed-throttle position.

WARNING: Injurious to eyes and mucous membranes, bonds skin-to-skin in seconds. Harmful if swallowed. Flammable, do not expose to heat or open flame. Contains Cyanoacrilate. VAPOUR IS HARMFUL! Use only in well-ventilated areas, store in a cool dry place and keep container closed when not in use.


First aid hints should contact occur…

  1. EYES: wash immediately for at least 10 minutes with copious amounts of water, and contact a doctor.
  2. SKIN: wash the affected area with warm soapy water, carefully separate the bonded surfaces, and clean skin with a pumice stone. Peel, don’t pull!
  3. INHALATION: take the person involved out into the open air.
  4. SWALLOWING: seek medical help.

In case of spillage, wash immediately, peel off the glue, and wash the affected area.

Additional information


Sandro Mentasti Environmental Protection Program since 2007


Quality Management system according to ISO 9001:2015 and Occupational Safety Management according to ISO 45001:2018


There are no reviews yet.

Be the first to review “SUPER-FAST GRIP GLUE ARIETE 12992”

Your email address will not be published. Required fields are marked *


Ariete, ARI and Harri’s products, while being of very high quality, may be subject to damage in case of impact or accident. Before using Ariete, Ari or Harri’s products, please carefully read the instructions for use and installation. Sandro Mentasti Srl makes every effort to ensure that the information contained in this catalogue is correct and easy to understand, with some information specific to individual products, but accepts no responsibility for any misinterpretation. If you should require any further information, regarding assembly and/or conditions for use, please contact Sandro Mentasti Srl by e-mail at In any event, Sandro Mentasti Srl is not liable for any damage to property and/or persons caused during the use of its products, and neither for any damage resulting from incorrect use and/or use other than that for which the product was originally intended, and damage resulting from assembly errors and/or incorrect installation. Sandro Mentasti Srl manufactures its products directly, and markets them with the ARIETE, ARI and HARRI’S brands. The use contained within the catalogues of any original product codes bearing brands other than those mentioned above is intended as merely descriptive, as well as the possible use of trademarks and / or names of other manufacturers (for example, PIAGGIO®, HONDA®, YAMAHA®, SUZUKI®, KAWASAKI®, BMW®, VESPA®, KYMCO®) which Sandro Mentasti Srl is in no way connected. The only purpose of this use is to describe the accessory and/or the part.

You may also like…


Go to Top